序
Preface / 前言
Chapter 1Introduction / 引言 1
1.1 Birth of a Concept / 概念的誕生 2
1.2 Some Basic Definitions / 基本定義 3
1.3 Synthesis of Polymers / 聚合物的合成 5
1.4 Nomenclature / 命名法 5
1.5 Average Molar Masses and Distributions / 平均摩爾質量及分布 9
1.6 Size and Shape / 大小和形狀 11
1.7 Configuration / 構型 13
1.8 The Glass Transition Temperature Tg and the Melting
Temperature Tm / 玻璃化轉變溫度Tg及熔點Tm 15
1.9 Elastomers, Fibers, and Plastics / 彈性體、纖維及塑料 17
1.10 Fiber-Forming Polymers / 成纖聚合物 19
1.11 Plastics / 塑料 19
1.12 Thermosetting Polymers / 熱固性聚合物 22
1.13 Elastomers / 彈性體 22
Problems / 習題 26
References / 參考文獻 28
Bibliography / 參考書目 28
Chapter 2Step-Growth Polymerization / 逐步增長聚合 31
2.1 General Reactions / 一般反應 32
2.2 Reactivity of Functional Groups / 官能團的反應活性 33
2.3 Carothers Equation / Carothers方程 34
2.4 Control of the Molar Mass / 摩爾質量的控制 36
2.5 Stoichiometric Control of Mn / Mn的化學計量控制 38
2.6 Kinetics / 動力學 40
2.7 Molar Mass Distribution in Linear Systems / 線性體系中的摩
爾質量分布 41
2.8 Average Molar Masses / 平均摩爾質量 42
2.9 Characteristics of Step-Growth Polymerization / 逐步增長聚合
的表征 42
2.10 Typical Step-Growth Reactions / 典型的逐步增長聚合 42
2.11 Ring Formation / 成環 43
2.12 Nonlinear Step-Growth Reactions / 非線性逐步增長聚合 44
2.13 Statistical Derivation / 統計推導 45
2.14 Comparison with Experiment / 實驗對比 46
2.15 Polyurethanes / 聚氨酯 48
2.16 Thermosetting Polymers / 熱固性聚合物 51
Problems / 習題 54
References / 參考文獻 58
Bibliography / 參考書目 58
Chapter 3Free-Radical Addition Polymerization / 自由基加成
聚合 59
3.1 Addition Polymerization / 加成聚合 60
3.2 Choice of Initiators / 引發劑的選擇 60
3.3 Free-Radical Polymerization / 自由基聚合 61
3.4 Initiators / 引發劑 62
3.4.1 Initiator Efficiency / 引發劑效率. 65
3.5 Chain Growth / 鏈增長 65
3.6 Termination / 終止 65
3.7 Steady-State Kinetics / 穩態動力學 66
3.8 High-Conversion Bulk Polymerizations / 高轉化率本體聚合 68
3.9 Chain Transfer / 鏈轉移 70
3.9.1 Consequences of Chain Transfer / 鏈轉移的結果 73
3.10 Inhibitors and Retarders / 阻聚劑和緩聚劑 73
3.11 Activation Energies and the Effect of Temperature / 活化能和溫
度的影響 75
3.12 Thermodynamics of Radical Polymerization / 自由基聚合物
熱力學 76
3.13 Heats of Polymerization / 聚合熱 79
3.14 Polymerization Processes / 聚合過程 79
3.15 Features of Free-Radical Polymerization / 自由基聚合的特性 82
3.16 Controlled Radical Polymerization / 可控自由基聚合 82
3.17 Nitroxide-Mediated Polymerizations / 氮氧自由基介導的聚合 84
3.18 Atom Transfer Radical Polymerization (ATRP) / 原子轉移自
由基聚合（ATRP） 85
3.19 Reverse ATRP / 可逆原子轉移自由基聚合 86
3.20 Degenerative Chain Transfer Reaction (DT) / 衰減鏈轉移反
應（DT） 87
3.21 Reversible Addition Fragmentation Chain Transfer (RAFT) /
可逆加成斷型鏈轉移（RAFT） 54
3.22 CRP of Vinyl Chloride / 氯乙烯的可控自由基聚合 90
3.23 The Kinetics of CRP Processes / 可控自由基聚合過程動力學 90
3.24 Application to Experimental Data / 應用于實驗的數據 93
Problems / 習題 95
References / 參考文獻 99
Bibliography / 參考書目 99
Chapter 4Ionic Polymerization / 離子聚合 101
4.1 General Characteristics / 離子聚合的一般特征 102
4.2 Cationic Polymerization / 陽離子聚合 103
4.3 Propagation by Cationic Chain Carriers / 經由陽離子鏈載體
的鏈增長 104
4.4 Termination / 終止 105
4.5 General Kinetic Scheme / 一般動力學方程 106
4.6 Energetics of Cationic Polymerization / 陽離子聚合熱力學 106
4.7 Telechelic Polymers via Cationic Polymerization / 由陽離子聚
合制備遙爪聚合物 107
4.8 Cationic Ring Opening Polymerization / 陽離子的開環聚合 108
4.9 Stable Carbocations / 穩態的碳陽離子 110
4.10 Anionic Polymerization / 陰離子聚合 111
4.11 Living Polymers / 活性聚合物 112
4.12 Kinetics and Molar Mass Distribution in Living Anionic Systems /
活性陰離子聚合動力學及摩爾質量分布 113
4.13 Metal Alkyl Initiators / 金屬烷基化合物引發劑 117
4.14 Solvent and Gegen Ion Effects / 溶劑和平衡離子效應 117
4.15 Anionic Ring-Opening Polymerization / 陰離子開環聚合 117
Problems / 習題 119
References / 參考文獻 121
Bibliography / 參考書目 122
Chapter 5Linear Copolymers and Other Architectures / 線型共
聚物及其他構造 123
5.1 General Characteristics / 一般特性 124
5.2 Composition Drift / 組成飄移 125
5.3 The Copolymer Equation / 共聚合方程 125
5.4 Monomer Reactivity Ratios / 單體競聚率 126
5.5 Reactivity Ratios and Copolymer Structure / 競聚率與共聚物
的結構 127
5.6 Monomer Reactivities and Chain Initiation / 單體反應活性與
鏈引發 130
5.7 Influence of Structural Effects on Monomer Reactivity Ratios /
結構效應對單體競聚率的影響 130
5.7.1 Resonance Effects / 共振效應 130
5.7.2 Polar Effects / 極性效應 132
5.8 The Q杄 Scheme / Q杄概念 132
5.9 Alternating Copolymers / 交替共聚物 134
5.10 Block Copolymer Synthesis / 嵌段共聚物 136
5.10.1 Transformation Reactions / 轉化反應 138
5.10.1.1 Cationic to CRP / 陽離子向可控自由基聚
合 140
5.10.1.2 Anionic to CRP / 陰離子向可控自由基聚
合 141
5.10.1.3 ROMP to ATRP / 開環易位聚合向原子轉
移自由基聚合 142
5.10.1.4 Step-Growth ATRP / 逐步增長原子轉移自
由基聚合 142
5.10.2 Coupling Reactions / 偶合反應 143
5.10.3 Use of CRP Methods / 可控自由基聚合方法的應用 145
5.11 Graft Copolymer Synthesis / 接枝共聚物的合成 148
5.12 Statistical and Gradient Copolymers / 無規和粘度共聚物 150
5.13 Complex Molecular Architectures / 復雜分子結構 151
5.14 Dendrimers / 樹枝狀分子 152
5.14.1 Divergent Growth / 發散性增長 153
5.14.2 Convergent Growth / 收斂性增長 154
5.14.3 Dendrimer Molecular Weight / 樹枝狀大分子的分子
量 155
5.14.4 Properties of Dendrimers / 樹枝狀分子的性質 156
5.14.5 Applications of Dendrimers / 樹枝狀分子的應用 157
Problems / 習題 158
References / 參考文獻 159
Bibliography / 參考書目 159
Chapter 6Polymer Stereochemistry / 聚合物立體化學 160
6.1 Architecture / 結構 161
6.2 Orientation / 取向 161
6.3 Configuration / 構型  162
6.3.1 Monotactic Polymers / 單一立構規正聚合物 163
6.3.2 Ditactic Polymers / 雙立構規正聚合物 164
6.33 Polyethers / 聚醚 164
6.4 Geometric Isomerism / 幾何異物 166
6.5 Conformation of Stereoregular Polymers / 有規立構聚合物
的構象 167
6.6 Factors Influencing Stereoregulation / 影響有規立構的因素 169
6.7 Homogeneous Stereospecific Cationic Polymerizations / 均相
立體選擇性陽離子聚合 171
6.8 Homogeneous Stereoselective Anionic Polymerizations / 均相
立體選擇性陰離子聚合 172
6.9 Homogeneous Diene Polymerization / 均相二烯烴聚合 174
6.10 Summary / 小結 176
Problems / 習題 176
References / 參考文獻 177
Bibliography / 參考書目 177
Chapter 7Polymerization Reactions Initiated by Metal Catalysts
and Transfer Reactions / 金屬催化劑引發的聚合反應及
其轉移反應 178
7.1 Polymerization Using Ziegler朜atta Catalysts / 利用Ziegler? Natta催化劑的聚合 179
7.2 Nature of the Catalyst / 催化劑的特點 180
7.3 Nature of Active Centers / 活性中心的特點 181
7.4 Bimetallic Mechanism / 雙金屬催化機理 181
7.5 Monometallic Mechanism / 單金屬催化機理 182
7.6 Stereoregulation / 有規立構化 184
7.7 Ring-Opening Metathesis Polymerization (ROMP) / 開環易位
聚合（ROMP） 185
7.8 Monocyclic Monomers / 單環單體 185
7.9 Bicyclo- and Tricyclomonomers / 雙環和三環單體 187
7.10 Copolyalkenamers / 共聚烯烴 188
7.11 Living Systems / 活性體系 188
7.12 Group Transfer Polymerization (GTP) / 基因轉移聚合（GTP） 190
7.13 Aldol Group Transfer Polymerization / 醇醛基因轉移聚合 191
7.14 Metallocene Catalysts / 茂金屬催化劑 192
7.14.1 Metallocene/Aluminoxane Catalysts / 茂金屬絡合物/
鋁氧烷催化劑 193
7.14.2 Stereoregulation / 有規立構化 193
7.14.3 Cationic Metallocenes / 陽離子茂金屬 196
7.14.4 Mechanism of Stereoregulation / 有規立構化機理 196
7.15 Concluding Remarks / 結論 197
Problems / 習題 198
References / 參考文獻 198
Bibliography / 參考書目 198
Chapter 8Polymers in Solution / 聚合物溶液 200
8.1 Thermodynamics of Polymer Solutions / 聚合物溶液熱力學 201
8.2 Ideal Mixtures of Small Molecules / 小分子的理想混合物 201
8.3 Nonideal Solutions / 非理想溶液 203
8.4 Flory朒uggins Theory: Entropy of Mixing / Flory朒uggins理
論混合熵 203
8.5 Enthalpy Change on Mixing / 混合焓變 207
8.6 Free Energy of Mixing / 混合自由能 208
8.7 Limitations of the Flory-Huggins Theory / Flory-Huggins理論
的局限性. 209
8.8 Phase Equilibria / 相平衡 210
8.9 Flory朘rigbaum Theory / Flory朘rigbaum理論 212
8.10 Location of the Theta Temperature / q溫度的測定 214
8.11 Lower Critical Solution Temperatures / 低臨界溶液溫度 218
8.12 Solubility and the Cohesive Energy Density / 溶解度和內聚
能密度 220
8.13 Polymer朠olymer Mixtures / 聚合物-聚合物混合物 223
8.14 Kinetics of Phase Separation / 相分離動力學 227
Problems / 習題 228
References / 參考文獻 231
Bibliography / 參考書目 231
Chapter 9Polymer Characterization - Molar Masses / 聚合物表
征—摩爾質量 233
9.1 Introduction / 簡介 234
9.2 Molar Masses, Molecular Weights, and SI Units / 摩爾質量、
分子量及國際單位制 234
9.3 Number-Average Molar Mass Mn / 數均摩爾質量Mn 234
9.4 End-Group Assay / 端基分析 235
9.5 Colligative Properties of Solutions / 溶液的依數性 235
9.6 Osmotic Pressure / 滲透壓法 236
9.7 Light Scattering / 光散射法 239
9.7.1 Scattering from Large Particles / 大粒子的散射 241
9.8 Dynamic Light Scattering / 動態光散射 244
9.9 Viscosity / 黏度法 245
9.9.1 Viscosity-Average Molecular Weight / 黏均分子量 247
9.10 Gel Permeation Chromatography / 凝膠滲透色譜法 248
9.11 MALDI / 基質輔助激光解的電離質譜法 252
Problems / 習題 253
References / 參考文獻 256
Bibliography / 參考書目 257
Chapter 10Polymer Characterization - Chain Dimensions, Struc-
tures, and Morphology / 聚合物表征—鏈尺寸、結
構及形態學 258
10.1 Average Chain Dimensions / 平均鏈尺寸 259
10.2 Freely Jointed Chain Model / 自由連接鏈模型 260
10.3 Short-Range Effects / 短程效應 261
10.4 Chain Stiffness / 鏈的剛性 261
10.5 Treatment of Dilute Solution Data / 稀溶液數據的處理 262
10.5.1 The Second Virial Coefficient / 第二維利系數 262
10.5.2 Expansion Factor  / 溶脹因子 263
10.5.3 Flory朏ox Theory / Flory朏ox理論 264
10.5.4 Indirect Estimates of Unperturbed Chain Dimensions /
無擾鏈尺寸的間接估測 265
10.5.5 Influence of Tacticity on Chain Dimensions / 規整度對
鏈尺寸的影響 265
10.6 Nuclear Magnetic Resonance (NMR) / 校磁共振（NMR） 266
10.7 Infrared Spectroscopy / 紅外光譜 268
10.8 Thermal Analysis / 熱分析 270
10.9 Wide-Angle and Small-Angle Scattering / 廣角及小角散射 271
10.9.1 Wide-Angle X-Ray Scattering / 廣角X射線散射 272
10.9.2 Small-Angle X-Ray Scattering (SAXS) / 小角X射線
散射（SAXS） 273
10.9.3 Small-Angle Neutron Scattering (SANS) / 小角中子
散射（SANS） 274
10.10   Microscopy / 顯微技術 277
10.10.1 Optical Microscopy / 光學顯微鏡 278
10.10.2 Scanning Electron Microscopy / 掃描電子顯微鏡 279
10.10.3 Transmission Electron Microscopy / 透射電子顯微鏡 280
10.10.4 Atomic Force Microscopy and Scanning Tunneling Micro-
scopy/ 原子力和掃描隧道顯微鏡 280
Problems / 習題 282
References / 參考文獻 283
Bibliography / 參考書目 283
Chapter 11The Crystalline State and Partially Ordered Structures
/ 結晶態和部分有序結構 284
11.1 Introduction / 介紹 285
11.2 Mechanism of Crystallization / 結晶機理 285
11.3 Temperature and Growth Rate / 溫度和增長速率 287
11.4 Melting / 熔融 288
11.4.1 Effect of Crystallite Size on Melting / 微晶大小對熔融
的影響 288
11.5 Thermodynamic Parameters / 熱力學參數 288
11.6 Crystalline Arrangement of Polymers / 聚合物的晶體排列 291
11.6.1 Factors Affecting Crystallinity and Tm / 影響結晶度和
Tm的因素 291
11.6.1.1 Symmetry / 對稱性 291
11.6.1.2 Intermolecular Bonding / 分子間鍵合 292
11.6.1.3 Tacticity / 立構規整性 293
11.6.1.4 Branching and Molar Mass / 接枝與摩爾
質量 293
11.7 Morphology and Kinetics / 形態與動力學 293
11.8 Morphology  / 形態 293
11.8.1 Crystallites / 微晶 294
11.8.2 Single Crystals / 單晶 294
11.8.3 Hedrites / 多角晶 295
11.8.4 Crystallization from the Melt / 熔融結晶 295
11.8.5 Spherulites / 球晶 297
11.9 Kinetics of Crystallization / 結晶動力學 298
11.9.1 Isothermal Crystallization / 等溫結晶 299
11.9.2 The Avrami Equation / Avrami方程 299
11.9.3 Deviations from Avrami Equation / 偏離Avrami方程 300
11.10 Block Copolymers / 嵌段共聚物 300
11.11 Historical Development of Polymer Liquid Crystals / 聚合物
液晶的發展歷史 302
11.12 Liquid Crystalline Phases / 液晶相 303
11.13 Identification of the Mesophases / 中間相的識別 306
11.14 Lyotropic Main-Chain Liquid Crystal Polymers / 溶致性主鏈
液晶聚合物 308
11.15 Thermotropic Main-Chain Liquid Crystal Polymers / 熱致性
主鏈液晶聚合物 310
11.16 Side-Chain Liquid Crystal Polymers / 支鏈液晶聚合物 315
11.17 Chiral Nematic Liquid Crystal Polymers / 手性向列型液晶
聚合物 317
Problems / 習題 320
References / 參考文獻 324
Bibliography / 參考書目 324
Chapter 12The Glassy State and Glass Transition / 玻璃態和玻
璃化轉變 326
12.1 The Amorphous State / 無定形態 327
12.2 The Glassy State / 玻璃態 327
12.3 Relaxation Processes in the Glassy State / 玻璃態松弛過程 327
12.4 Glass Transition Region / 玻璃化轉變區域 329
12.4.1 The Glass Transition Temperature, Tg / 玻璃化轉變
溫度，Tg 329
12.4.2 Experimental Demonstration of Tg / Tg的實驗測定 330
12.4.2.1 Measurement of Tg from V-T Curves / V-T
曲線法則 331
12.4.2.2 Thermal Methods / 量熱法 332
12.4.3 Factors Affecting Tg / 影響玻璃化轉變溫度的因素 333
12.4.3.1 Chain Flexibility / 鏈柔性 334
12.4.3.2 Steric Effects / 立體位阻效應 334
12.4.3.3 Configurational Effects / 構型的影響 336
12.4.3.4 Effect of Cross-Links on Tg / 交聯對Tg的
影響 338
12.5 Theoretical Treatments / 理論處理 336
12.5.1 The Free-Volume Theory / 自由體積理論 337
12.5.2 Gibbs-Di Marzio Thermodynamic Theory / Gibbs-Di
Marzio熱力學理論 341
12.5.3 Adam-Gibbs Theory / Adam-Gibbs理論 342
12.6 Dependence of Tg on Molar Mass / 分子量對Tg的影響 343
12.7 Structural Relaxation and Physical Aging / 結構松弛和物
理老化 344
Problems / 習題 345
References / 參考文獻 348
Bibliography / 參考書目 349
Chapter 13Rheology and Mechanical Properties / 流變和力學
性能 350
13.1 Introduction to Rheology / 流變學簡介 351
13.2 The Five Regions of Viscoelastic Behavior / 黏彈行為的五個
區間 352
13.3 The Viscous Region / 黏性區 353
13.3.1 Shear Dependence of Viscosity / 黏度對剪切的依賴
性 355
13.3.2 Kinetic Units in Polymer Chains / 聚合物鏈的動力
學單元 357
13.3.3 Effect of Chain Length / 鏈長的影響 358
13.3.4 Temperature Dependence of  / 黏度對溫度的依賴
性 359
13.3.5 Concentration Dependence of Viscosity / 黏度對濃度
的依賴性 359
13.3.6 Time-Dependent Behavior / 流體行為的時間依賴性 360
13.4 Mechanical Properties / 力學性能 361
13.4.1 Interrelation of Moduli / 模量之間的相互關系 363
13.5 Mechanical Models Describing Viscoelasticity / 描述黏彈性
的力學模型 363
13.6 Linear Viscoelastic Behavior of Amorphous Polymers / 無定型
聚合物的線性黏彈性行為 366
13.6.1 Creep / 蠕變 369
13.6.2 Stress朣train Measurements / 應力-應變測試 369
13.6.3 Effect of Temperature on Stress-Strain Response / 溫
度對應力-應變響應的影響 369
13.6.4 Boltzmann Superposition Principle / 玻耳茲曼疊加原
理 371
13.6.5 Stress Relaxation / 應力松弛 372
13.7 Dynamic Mechanical and Dielectric Thermal Analysis / 動態
力學和介電熱分析 372
13.7.1 Dynamic Mechanical Thermal Analysis (DMTA) / 動
態力學熱分析（DMTA） 372
13.7.2 Dielectric Thermal Analysis (DETA) / 介電熱分析
（DETA） 375
13.7.3 Comparison Between DMTA and DETA / DMTA和DETA
的比較 377
13.8 Time-Temperature Superposition Principle / 時溫疊加原理 379
13.9 Dynamic Viscosity / 動力黏度 383
13.10 A Molecular Theory for Viscoelasticity / 黏彈性的分子
理論 384
13.11 The Reptation Model / 蠕動模型 386
Problems / 習題 388
References / 參考文獻 393
Bibliography / 參考書目 394
Chapter 14  The Elastomeric State / 高彈態 395
14.1 General Introduction / 一般介紹 396
14.1.1 Natural Rubber / 天然橡膠 397
14.2 Experimental Vulcanization / 硫化實驗 398
14.3 Properties of Elastomers / 彈性體的性質 398
14.4 Thermodynamic Aspects of Rubberlike Elasticity / 類橡膠彈性
的熱力學方面 399
14.5 Nonideal Elastomers / 非理想彈性體 401
14.6 Distribution Function for Polymer Conformation / 聚合物構象
的分布函數 402
14.7 Statistical Approach / 統計學方法 405
14.7.1 Experimental Stress朣train Results / 應力-應變實驗
結果
14.7.1.1 Simple Extension / 簡單拉伸 405
14.7.1.2 Simple Compression / 簡單壓縮 407
14.7.1.3 Pure Shear / 純剪切 407
14.7.1.4 Large Elastic Deformation / 大彈性變形 407
14.8 Swelling of Elastomeric Networks / 彈性體網絡的溶脹 407
14.9 Network Defects / 網絡缺陷 408
14.10 Resilience of Elastomers / 彈性體的回彈性 410
Problems / 習題 412
References / 參考文獻 415
Bibliography / 參考書目 415
Chapter 15Structure朠roperty Relations / 結構與性能的關系 416
15.1 General Considerations / 概論 417
15.2 Control of Tm and Tg / Tm和Tg的控制 417
15.2.1 Chain Stiffness / 鏈的剛性 418
15.2.2 Intermolecuar Bonding / 分子間鍵合 419
15.3 Relation Between Tm and Tg / Tm和Tg的聯系 421
15.4 Random Copolymers / 無規共聚物 421
15.5 Dependence of Tm and Tg on Copolymer Composition / 共聚物
組成對Tm和Tg的影響 422
15.6 Block Copolymers / 嵌段共聚物 425
15.7 Plasticizers / 增塑劑 427
15.8 Crystallinity and Mechanical Response / 結晶度和力學響應 428
15.9 Application to Fibers, Elastomers, and Plastics / 在纖維、塑料
和彈性體上的應用 430
15.10  Fibers / 纖維 430
15.10.1 Chemical Requirements / 化學要求 431
15.10.1.1 Linear Polyesters / 線型聚酯 433
15.10.2 Mechanical Requirements for Fibers / 纖維的力學
性能 434
15.10.2.1 Spinning Techniques / 紡絲技術 434
15.10.2.1.1 Melt Spinning / 熔融紡絲 434
15.10.2.1.2 Wet and Dry Spinning /
濕法和干法紡絲 434
15.10.2.2 Drawing, Orientation, and Crystallinity /
拉伸、取向和結晶度 435
15.10.2.3 Modulus and Chain Stiffness / 模量和
鏈的剛性 436
15.10.2.4 Other Factors / 其他因素 436
15.11 Aromatic Polyamides / 芳香族聚酰胺 437
15.12 Polyethylene / 聚乙烯 439
15.13 Elastomers and Cross-Linked Networks / 彈性體和交聯網絡 442
15.13.1 Cross-Linking / 交聯 443
15.13.2 Creep in Cross-Linked Polymers / 交聯聚合物中
的蠕變 443
15.13.3 Additives / 添加劑 443
15.14 Plastics / 塑料 443
15.14.1 Plastic Selection for Bottle Crate Manufacture / 制
造瓶用周轉箱的塑料 445
15.14.2 Medical Applications / 醫學應用 446
15.15 High-Temperature Speciality Polymers / 高溫特種聚合物 447
15.16 Carbon Fibers / 碳纖維 454
15.17 Concluding Remarks / 結論 454
Problems / 習題 456
References / 參考文獻 461
Bibliography / 參考書目 462
Chapter 16Polymers for the Electronics Industry / 聚合物在電子
工業中的應用 463
16.1 Introduction / 介紹 464
16.2 Polymer Resists for IC Fabrication / 聚合物抗蝕劑在工業中
的應用 464
16.3 The Lithographic Process / 光刻工藝 465
16.4 Polymer Resists / 聚合物抗蝕劑 466
16.4.1 Sensitivity / 敏感性 467
16.4.2 Resolution / 清晰度 468
16.5 Photolithography / 光刻法 468
16.5.1 Positive Photoresists / 正性光致抗蝕劑 468
16.5.2 Negative Photoresists / 負性光致抗蝕劑 469
16.6 Electron Beam Sensitive Resists / 電子束敏感抗蝕劑 472
16.6.1 Positive Resists / 正性抗蝕劑 472
16.6.2 Negative Resists / 負性抗蝕劑 473
16.7 X-ray and Ion Sensitive Resists / X射線和離子敏感抗蝕劑 473
16.8 Electroactive Polymers / 電活性聚合物 474
16.9 Conduction Mechanisms / 導電機理 475
16.10 Preparation of Conductive Polymers / 導電聚合物的制備 476
16.11 Polyacetylene / 聚乙炔 478
16.12 Poly(p-phenylene) / 聚苯撐 481
16.13 Polyheterocyclic Systems / 雜環聚合物 483
16.13.1 Polypyrrole / 聚吡咯 484
16.13.2 Sulfur Compounds / 硫化物 484
16.14 Polyaniline / 聚苯胺 485
16.15 Poly(Phenylene Sulfide) / 聚苯硫醚 485
16.16 Poly(1,6-heptadiyne) / 聚（1,6-庚二炔） 485
16.17 Applications / 應用 485
16.18 Photonic Applications / 光子應用 486
16.19 Light-Emitting Polymers / 發光聚合物 486
16.19.1 Applications / 應用 487
16.20 Nonlinear Optics / 非線性光學 487
16.21 Langmuir朆lodgett Films / LB膜 490
16.22 Optical Information Storage / 光信息存儲 492
16.23 Thermorecording on Liquid Crystalline Polymers / 用液晶聚
合物進行熱記錄 496
References / 參考文獻 495
Bibliography / 參考書目 495
Preface / 前言