《普通高等教育材料成型及控制工程系列規劃教材：焊接科學與工程專業英語》主要介紹焊接技術與工程專業的基礎知識和專業知識英語文獻�！镀胀ǜ叩冉逃牧铣尚图翱刂乒こ滔盗幸�(guī)劃教材：焊接科學與工程專業英語》內容大部分選自國外原版教材，教材共分九章，內容包括焊接技術與工程專業知識的諸多方面的英語文獻。內容涉及現代工程結構材料、金屬材料的力學性能及熱物理性能、鋼的熱處理、電弧物理等焊接技術基礎知識，以及弧焊電源、焊接方法及設備、焊接冶金學、焊接工藝、焊接應力與變形、焊接自動化及焊接質量檢驗等焊接專業知識。
《普通高等教育材料成型及控制工程系列規劃教材：焊接科學與工程專業英語》為高等院校焊接專業學生專用教材，也可以供從事焊接技術與工程領域工作的工程技術人員參考。
Chapter 1 Welding Technology Fundamental
1.1 Modern Engineering Structural Material
1.2 Mechanical Property of Metal Material
1.3 Thermophysical Property of Metal Material
1.3.1 Specific Heat
1.3.2 Thermal Expansion
1.3.3 Thermal Conductivity
1.3.4 Melting Point or Melting Range
1.3.5 Thermionic Work Function
1.4 Principal Types of Heat Treatment of Steel
1.5 Arc Physics
1.5.1 Stability of Electric Arc
1.5.2 Stability of AC Arc
Chapter 2 Arc Welding Power Source
Chapter 1 Welding Technology Fundamental
1.1 Modern Engineering Structural Material
1.2 Mechanical Property of Metal Material
1.3 Thermophysical Property of Metal Material
1.3.1 Specific Heat
1.3.2 Thermal Expansion
1.3.3 Thermal Conductivity
1.3.4 Melting Point or Melting Range
1.3.5 Thermionic Work Function
1.4 Principal Types of Heat Treatment of Steel
1.5 Arc Physics
1.5.1 Stability of Electric Arc
1.5.2 Stability of AC Arc
Chapter 2 Arc Welding Power Source
2.1 Classification of Power Source
2.1.1 AC Power Supplies
2.1.2 DC power supplies
2.1.3 Inverse Source of Arc Welding
2.2 Electrical Characteristics of Power Source
2.2.1 Constant Voltage
2.2.2 Constant Current
2.2.3 Combined Constant?Current and Constant VoltageCharacteristics
2.3 Selecting and Specifying a Power Source
Chapter 3 Arc Welding Process
3.1 Shielded Metal?Arc Welding
3.2 Gas Shielded?Arc Welding
3.2.1 Specific Advantages of Gas?shielded Arc
3.2.2 Types of Gas?Shielded Arc Processes
3.2.3 Gas Tungsten Arc?Tig
3.2.4 Gas Metal Arc?Mig
3.2.5 CO2 Welding
3.2.6 Pulsed Arc Welding
3.3 Submerged Arc Welding Fundamentals of the process
3.3.1 Definition and general description
3.3.2 Principles of operation
3.4 Plasma Arc Welding
3.4.1 Keyhole Action
3.4.2 Arc Shaping
3.4.3 Operating Data
3.4.4 Applications
3.4.5 Summary
Chapter 4 Other Welding Methods
4.1 Resistance Welding
4.1.1 Introduction
4.1.2 Resistance Spot Welding（RSW）
4.1.3 Projection Welding
4.1.4 Resistance Seam Welding（RSEW）
4.1.5 Upset Butt Welding
4.1.6 Flash Butt Welding
4.2 Friction Stir Welding
4.2.1 Introduction
4.2.2 Principles
4.2.3 Friction Stir Tool
4.2.4 Friction Stirring Imperfections
4.3 Laser Beam Welding
4.3.1 Introduction
4.3.2 Principles
4.3.3 Metals Welded
4.3.4 Machines
4.3.5 Parameters and Technology
4.4 Electron Beam Welding
4.4.1 Introduction
4.4.2 Principles
4.4.3 Variations
4.4.4 Equipment
4.4.5 Safety
Chapter 5 Welding Metallurgy
5.1 Chemical Reactions in Welding
5.1.1 Overview
5.1.2 Gas?Metal Reactions
5.1.3 Slag?Metal Reactions
5.2 Weld Metal Solidification
5.2.1 Epitaxial Growth at Fusion Boundary
5.2.2 Nonepitaxial Growth at Fusion Boundary
5.2.3 Competitive Growth in Bulk Fusion Zone
5.2.4 Effect of Welding Parameters on Grain Structure
5.2.5 Weld Metal Nucleation Mechanisms
5.2.6 Grain Structure Control
5.3 The Microstructure and Properties of Heat?affected Zone
5.3.1 Welding Thermal Cycle
5.3.2 The Microstructure Changes in the HAZ
5.3.3 Hardness Distribution in the HAZ
5.3.4 Welding Cracks in the HAZ
Chapter 6 Weldability of Material
6.1 Weldability of Material and Testing Method
6.1.1 Weldability of Material
6.1.2 Weldability Evaluation and Test Method
6.2 Weldability of low carbon steel
6.2.1 Metallurgy of the liquid weld metal
6.2.2 Solidification and solidification cracking
6.2.3 Stress intensification,embrittlement and cracking of fusionwelds below the solidus
6.2.4 Lamellar tearing
6.2.5 Reheat Cracking
6.3 Weldability of Magnesium and Its Alloys
6.3.1 Alloys and Welding Procedures
6.3.2 Oxide Film Removal
6.3.3 Cracking
6.3.4 Mechanical Properties
6.3.5 Corrosion Resistance and Fire Risk
Chapter 7 Residual Stresses,Distortion and Fatigue
7.1 Residual stresses
7.1.1 Development of residual stresses
7.1.2 Analysis of Residual Stresses
7.2 Distortion
7.2.1 Cause
7.2.2 Remedies
7.3 Fatigue
7.3.1 Mechanism
7.3.2 Fractography
7.3.3 S?N Curves
7.3.4 Effect of Joint Geometry
7.3.5 Effect of Stress Raisers
7.3.6 Effect of Corrosion
7.3.7 Remedies
7.4 Case Studies
7.4.1 Failure of a Steel Pipe Assembly
7.4.2 Failure of a Ball Mill
Chapter 8 Automation of Welding
8.1 Introduction of Automatic Welding System
8.2 Flexible Automation of Welding
8.3 ARC Welding Robots
8.3.1 Introduction
8.3.2 Robot Manipulator Configuration
8.3.3 Robot Welding Application
8.3.4 Buying a Welding Robot
8.3.5 Robot Safety
8.4 Controls for Automatic Arc Welding
8.4.1 Automatic Welding Controllers
8.4.2 Robot Controllers
8.4.3 Teaching the Robot
8.4.4 Robot Memory
8.4.5 Weld Execution
8.5 Sensors and Adaptive Control
8.5.1 Introduction
8.5.2 Contact Sensors
8.5.3 Noncontact Sensor Systems
8.6 Tooling and Fixtures
Chapter 9 Welding Quality Inspection
9.1 Welding Defects
9.1.1 Definition and Types
9.1.2 Cracks
9.1.3 Porosity
9.1.4 Solid Inclusion
9.1.5 Lack of Fusion and Inadequate or incomplete penetration
9.1.6 Imperfect Shape
9.2 Non?destructive Testing
9.2.1 Radiographic Testing
9.2.2 Ultrasonic Testing（UT）
9.2.3 Magnetic Particle Inspection（MPI）
9.2.4 Liquid Penetrant Testing（PT）
9.3 Destructive Test
9.3.1 Tension Tests
9.3.2 Bend Tests
9.3.3 Charpy Tests
9.3.4 Hardness Testing
9.4 Radiograph Interpretation
9.4.1 General Welding Discontinuities
9.4.2 Other Discontinuities
References
書單推薦
