目 錄大會特邀報告The Impact of Decarbonisation Efforts on the Global Steel Industry Edwin BASSON I-1日本制鐵為實現碳中和所作的努力 福田 和久（FUKUDA KAZUHISA） I-1鋼鐵工業碳中和的思考與探索 毛新平 I-1POSCO's Green & Digital Challenges for Carbon Neutral Kisoo KIM I-2第十三屆冶金青年科技獎獲獎人特邀報告優特鋼長材轉型的系統性研究 馬志勇，楊勇強 II-1Systematic Research on the Transformation of Long Product and Special Steel MA Zhiyong, YANG Yongqiang高強高韌鈦合金研發及鋼鈦聯合技術趨勢 馬英杰，黃森森，雷家峰，楊 銳 II-1The Development of High Strength and Toughness Titanium Alloy and Technical Tendency of Titanium-steel Uniting MA Yingjie, HUANG Sensen, LEI Jiafeng, YANG Rui雙相不銹鋼沖擊韌性研究進展及工藝技術實踐 豐 涵，宋志剛，何建國，吳曉涵，王寶順，吳明華，李國平，周燦棟，高 虹 II-2Research Progress and Technology Practice of Impact Toughness of Duplex Stainless Steel FENG Han, SONG Zhigang, HE Jianguo, WU Xiaohan, WANG Baoshun,WU Minghua, LI Guoping, ZHOU Candong, GAO Hong高溫合金疲勞-蠕變-環境交互作用下裂紋擴展機制的研究 王民慶，杜金輝，鄧 群，田志凌，朱 靜 II-4The Mechanism of Crack Propagation for Superalloy under Fatigue-Creep-Environment Condition WANG Minqing, DU Jinhui, DENG Qun, TIAN Zhiling, ZHU Jing連鑄坯表面溫度在線測量與智能控制技術 龍木軍，陳登福，張晏銘，黃云偉，張思遠，譚 鍇 II-5On-line Measurement and Intelligent Control Technology of Continuous Casting Slab Surface Temperature LONG Mujun, CHEN Dengfu, ZHANG Yanming, HUANG Yunwei, ZHANG Siyuan, TAN KaiHB600級耐磨鋼組織和硬度均勻性對耐磨性能的影響 閆強軍，鄧想濤 II-6Effect of Microstructure and Hardness Uniformity on the Wear Resistance Performance of HB600 Steel YAN Qiangjun, DENG Xiangtao鋼鐵行業（含氯類）新污染物生成與控制技術研究及CO2捕集礦化技術進展蘇 偉，邢 奕，田京雷，侯長江，王嘉慶，孫宇佳，孫方舟，崔永康，郭文韜 II-7Research on the Generation and Control Technology of New Pollutants in the Iron and Steel Industry and the Progress of CO2 Capture and Mineralization Technology SU Wei, XING Yi, TIAN Jinglei, HOU Changjiang, WANG Jiaqing, SUN Yujia,SUN Fangzhou, CUI Yongkang, GUO Wentao攀西鈦資源開發與利用研究進展 李開華，李 亮，朱福興 II-8Research Progress on the Development and Utilization of Titanium Resources in Panxi LI Kaihua, LI Liang, ZHU Fuxing高精度冷連軋數字孿生與信息物理系統（CPS）關鍵技術研發及應用 李 旭 II-9Development and Application of Key Technologies for Digital Twin and Cyber-Physical Systems (CPS) for High-precision Cold Tandem Rolling LI Xu基于無廢城市建設的長流程鋼廠固廢管理模式與技術路徑 李紅紅 II-10Solid Waste Management Mode and Technical Path of Long-process Steel Plant Based on the Concept of Zero-waste Construction LI Honghong無底層綠色環保涂層高磁感取向硅鋼的開發與推廣應用研究 楊佳欣，申明輝，宋 剛 II-11Development and Application Promotion of Glassless High Permeability Grain-oriented Silicon Steel with Green and Environmentally Friendly Coating YANG Jiaxin, SHEN Minghui, SONG GangNi對低合金鋼海洋大氣腐蝕產物氧化還原行為影響 楊建煒，劉智勇 II-11Effect of Ni on Oxidation and Reduction Behavior of Corrosion Product Formed on Low Alloy Steel in Marine Atmosphere YANG Jianwei, LIU ZhiyongCr和RE元素對HRB400螺紋鋼耐蝕性能的影響規律研究 陳永峰，陳天奇，劉 濤，楊偉勇，劉 超 II-12Study on the Effect Pattern of Cr and RE Elements on the Corrosion Resistance of HRB400 Rebars CHEN Yongfeng, CHEN Tianqi, LIU Tao, YANG Weiyong, LIU Chao鞍鋼鋼鐵產品數字化研發實踐與展望 林 利，王軍生 II-14Anshan Iron and Steel Products Digital R&D Practice and Prospects LIN Li, WANG Junsheng鋼液初始凝固坯殼捕渣機理及夾渣缺陷控制研究 鐘小燦，周樂君，羅 豪，王萬林 II-14Mechanism and Controlling of the Slag Capture in the Initial Solidification Shell during the Continuous Casting Process ZHONG Xiaocan, ZHOU Lejun, LUO Hao, WANG Wanlin分層供熱低碳富氫燒結技術的研發與應用 周浩宇，葉恒棣，張俊杰，甘 敏 II-16Research and Application of Stratified Heat Supply for Homogeneous and Low Carbon Sintering ZHOU Haoyu, YE Hengdi, ZHANG Junjie, GAN Min金屬材料的微生物腐蝕機理與防治 徐大可 II-17Microbiologically Influenced Corrosion of Metals: Mechanism and Mitigation XU Dake鎳鐵渣增值利用研究進展 彭志偉 II-18Research Advances in Value-added Utilization of Ferronickel Slag PENG Zhiwei抽錠電渣重熔關鍵技術、裝備的研發及推廣應用 臧喜民，姜周華，劉福斌，耿 鑫，李萬明 II-18Research and Application on Technology and Equipment of Electroslag Remelting Withdrawal Process ZANG Ximin, JIANG Zhouhua, LIU Fubin, GENG Xin, LI Wanming地下鐵礦山高階段嗣后膠結充填理論與應用研究 譚玉葉，宋衛東，張興才 II-19Application and Theory Study on the High-stage Subsequent Cemented Filling in Underground Iron Mine TAN Yuye, SONG Weidong, ZHANG Xingcai分會場特邀報告金屬礦山智能化膏體充填開采——以謙比希銅礦為例 吳愛祥 III-1適應時代發展，建設六維礦山 連民杰 III-1智能礦山建設的探索與實踐 武拴軍 III-1實施雙碳規劃引領，加快綠色轉型發展——武鋼資源可持續發展路徑探索 魯炳強 III-2我國金屬礦智能化開采現狀與發展 王李管 III-2難選鐵礦石選礦技術發展及展望 陳 雯 III-2磁選設備的研發及應用現狀 王俊蓮，常自勇，王曉莉，王化軍 III-3鉻鐵礦石選礦技術現狀及趨勢 孫炳泉 III-4提高旋流器分級精度的應用研究進展 劉培坤 III-4新型磁鐵礦精選設備——永磁組合箱式磁選機 袁致濤，孟慶有，周明亮 III-4瓷球磨礦在鐵礦山中的工業應用 吳彩斌 III-5鐵礦石磨礦-分級數學模型研究與實踐 崔寶玉，趙 強 III-5戰略金屬硫化礦海水浮選基礎及應用 李育彪 III-6重載高效濃密機在選礦廠的應用 曾建紅 III-6低成本高爐用焦與精細化配煤新技術體系 程 歡，肖璐穎，廖 飛，胡文佳 III-7高強度高反應性焦炭的制備技術 徐國忠，鐘祥云，王明登，封一飛，白 濱，李 超，劉 洋（女），劉 洋（男），張雅茹，白金鋒 III-8智慧煉焦解決方案的研究與應用 王慧璐 III-8超高溫連鑄坯熱送與直接軋制關鍵技術 朱苗勇，蔡兆鎮，羅 森，祭 程，王衛領 III-9Key Technology for Hot Delivery and Direct Rolling of Ultra-high Temperature Continuous Casting Slab ZHU Miaoyong, CAI Zhaozhen, LUO Sen, JI Cheng, WANG Weiling特大斷面圓坯連鑄技術發展與產品質量控制 張家泉，董 娟，劉 謙 III-10Super Large Section Round Bloom Casting and the As-cast Product Quality Control ZHANG Jiaquan, DONG Juan, LIU Qian低碳背景下PMO技術的創新發展與應用 翟啟杰 等 III-11Innovative Development and Application of PMO Technology in the Theme of Low Carbon ZHAI Qijie et al鋼液脫硫機理的實驗、理論和模擬仿真研究 張立峰 III-12連鑄保護渣關鍵問題及研究進展 文光華 III-13Key Problems and Research Progress in Mold Powders for Continuous Casting WEN Guanghua鞍鋼創新質量管理理念與實踐 孫 群 III-14Innovative Quality Management Concept and Practice of Angang SUN Qun游離晶對鑄錠組織形成的影響 韓青有 III-14Floating Grains and Their Influence on the Solidification Structure of a Billet HAN Qingyou等軸晶薄帶連鑄與短流程電工鋼 周 成，周 游，玄東坡，姜天亮，范文浩，毛 焱，松希郎卡智美 III-15Strip Casting with Equiaxed Grains and Electrical Steels by the Short Processes ZHOU Cheng, ZHOU You, XUAN Dongpo, JIANG Tianliang, FAN Wenhao, MAO Yan, SONGXI Langkazhimei我國電爐短流程煉鋼發展研究 王 濱，余 璐 III-17Research on the Development of EAF Steelmaking Process in China WANG Bin, YU Lu我國電爐短流程煉鋼資源現狀與發展 楊 勇，姚同路 III-19Current Situation and Development of EAF Short Process Steelmaking Resources in China YANG Yong, YAO Tonglu寶鋼電爐綠色低碳冶金探索與進展 李治平，徐迎鐵，孟慶玉 III-21超高功率柔性IGBT直流電源和智能化電弧爐煉鋼技術 張豫川，吳學濤，楊寧川 III-21Ultra-high Power Flexible IGBT DC Power Supply and Intelligent Electric Arc Furnace Steelmaking Technology ZHANG Yuchuan, WU Xuetao, YANG Ningchuan低碳電爐煉鋼工藝典型特征和實踐路徑 王中丙 III-22Typical Characteristics and Practical Path of Low Carbon Electric Arc Furnace Steelmaking WANG Zhongbing特冶技術進步推進鎳基合金發展及未來展望 楊玉軍 III-23Advancement of Special Metallurgical Technology Promotes the Development and Future Prospects ofNickel-based Alloys YANG Yujun特殊鋼冶煉過程DDS夾雜物控制技術探討 姜周華，董君偉，田家龍 III-24Discussion on Control Technology of DDS Inclusions in Special Steel Making Process JIANG Zhouhua, DONG Junwei, TIAN Jialong連鑄大壓下高質量特厚板生產及鐵素體軋制技術最新進展 康永林 III-25板形控制技術的最新研究進展 何安瑞 III-25首鋼高硅硅鋼連軋的工藝構想與實踐 馬家驥 III-25現代冷軋板帶綠色制造與智能制造 王業科，陶 濤，牛 強，劉顯軍 III-26Green Manufacturing and Intelligent Manufacturing of Modern Cold-rolled Strip WANG Yeke, TAO Tao, NIU Qiang, LIU Xianjun長材生產線技術革新與進步 楊勇強 III-27無加熱直接軋制關鍵技術與工業化 許宏安 III-27熱軋鋼筋低成本綠色生產技術 王衛衛 III-27鋼管技術和產品發展 成海濤 III-28寶鋼低碳綠色冷軋涂鍍鋼板工藝技術 任玉苓 III-28大厚度高韌性海洋工程用鋼工藝研究及工業實踐 趙 坦 III-28中薄板坯高等級管線鋼工藝研究及工業化實踐 林 利 III-29高速棒材生產線智能化創新建設及其關鍵技術 徐言東，王曉晨，程知松，余 偉，張勇軍，劉 洋，白金龍 III-29Innovation and Key Technologies of Intelligent High Speed Bar Production Line Construction XU Yandong, WANG Xiaochen, CHENG Zhisong, YU Wei, ZHANG Yongjun, LIU Yang, BAI Jinlong唐鋼特殊鍍層產品特性簡介 李建英 III-30寶鋼建筑用涂鍍產品未來發展 任玉苓 III-30QH涂鍍板環保長效保護涂層 張 俊 III-31卷鋼涂層輻射固化技術現狀及展望 馬 源 III-31結構鋼大氣環境腐蝕與試驗評價技術 蘇 艷 III-32中國金屬制品行業現狀及綠色低碳技術進展 毛海波，谷 宇，米振莉，汪 凱 III-32Present Situation and Green Low-Carbon Technology′s Progress in the Chinese Steel Wire Products Industry MAO Haibo, GU Yu, MI Zhenli, WANG KaiB750HL波形梁護欄輥彎成形策略研究 邢 剛，韓 飛，孫瑋隆 III-33Research on Roll Forming Strategy of B750HL Corrugated Beam Guardrail XING Gang, HAN Fei, SUN Weilong架空輸電線路耐候鋼桿塔關鍵技術及工程應用 黃 耀 III-34Key Technologies and Engineering Applications of Weathering Resistant Steel Poles and Towers for Overhead Transmission Lines HUANG Yao長壽命、輕量化盤扣式腳手架開發 方 幸，米振莉，趙愛民，熊靖蕓，王賀偉，華 維 III-35Development of Long-life, Lightweight Turnbuckle Scaffold FANG Xing, MI Zhenli, ZHAO Aimin, XIONG Jingyun, WANG Hewei, HUA Wei超高強鋼汽車A柱上邊梁的熱氣脹成形制造實踐 阮尚文，張 猛，成 剛，吳彥欣，米振莉，程鵬志 III-36定制輥壓成型技術與中國制造業的高質量發展 晏培杰 III-36C276哈氏合金的高溫熱變形行為研究 謝廣明，王豐睿，孟 晨，王玉前 III-37Study on Hot Deformation Behavior of C276 Hastelloy at High Temperature XIE Guangming, WANG Fengrui, MENG Chen, WANG YuqianCost-effective Fabrication of Advanced Heat Sink Materials from Powder YANG Fei III-38316L不銹鋼選區激光熔化增材制備過程的數值仿真研究 安希忠，咬登治，王 炬，吳 瓊，吳宇航 III-38激光增材制造高Co-Ni二次硬化超高強度鋼的組織設計和強韌性平衡策略 冉先喆 III-39復雜氧化物顆粒強化ODS鋼的增材制造成形及強韌化機制研究 劉 彬，曹遠奎，張宇陽，張瑞謙，劉 詠 III-39激光增材制造飛機起落架用超高強不銹鋼缺陷、組織與性能研究 劉壯壯 III-40實現向鋁合金中引入形變孿晶和9R相：合金化致層錯能降低及塑性變形的晶粒尺寸效應 周登山，張景藩，龐學永，張博文，李 躍，孫彬涵，VALIEV Ruslan Z.，張德良 III-40增材制造可降解鋅鎂合金 李亞庚 III-41增材制造高品質H13模具鋼的數值模擬、組織與力學性能研究 楊 鑫，張兆洋，徐圣航，劉石球，黃明浩，丁 超，湯慧萍 III-41Numerical Simulation, Microstructure, and Mechanical Properties of H13 Steel Fabricated by Additive Manufacturing YANG Xin, ZHANG Zhaoyang, XU Shenghang, LIU Shiqiu, HUANG Minghao, DING Chao, TANG Huiping冶金低熱值煤氣高效超臨界發電技術及應用 熊敬超 III-42The Development and Application of High-efficiency Supercritical Power Generation Technology for Metallurgy Low Calorific Value Gas XIONG Jingchao金屬材料數字化研發平臺架構與應用 蘇 航，劉和平，侯雅青，楊 麗，孫 旭，賀篤鵬 III-43AIM：實驗室小樣本數據與工業大數據的融合分析 王晨充，李虎威，徐 偉 III-43冷軋帶鋼力學性能“數據鋼卷”的實踐 唐成龍 III-44金屬材料高通量增材制備技術研究 侯雅青，蘇 航，應 華，張 浩，李發發，何亞洲，宋有朋，王炫東，張榮寶 III-44長輸管道環焊縫超聲相控陣缺陷數據分析技術研究 李學達，韓 彬，牛盛源，肖文濤，高振華 III-45基于機器學習的軸承鋼碳化物自動識別與評價 張莎莎，朱曉林，于帥鵬，束長青，姚正軍 III-46集成計算與金屬結構材料設計 魯曉剛 III-46鞍鋼鋼鐵產品數字化研發實踐與展望 林 利，王軍生 III-47Anshan Iron and Steel Products Digital R&D Practice and Prospects LIN Li, WANG Junsheng鋼鐵材料基因工程數據庫與大數據應用 姜 雪，張 雷，何 杰，宿彥京 III-48新能源汽車對汽車用鋼發展的機遇與挑戰 王 利 III-48Opportunities and Challenges of New Energy Vehicles for the Development of Automotive Steels WANG Li高性能汽車鋼材料多層級復雜組織調控 金學軍，李 偉，許元濤，劉仕龍 III-49Design of Hierarchical Complex Structure for High-performance Automotive Steel Materials JIN Xuejun, LI Wei, XU Yuantao, LIU Shilong增強成形性高強汽車鋼的組織性能研究 趙征志，褚曉紅，孫 航，楊玉環，唐 荻 III-50Study on Microstructure and Properties of High Strength Automotive Steel with Improved Formability ZHAO Zhengzhi, CHU Xiaohong, SUN Hang, YANG Yuhuan, TANG Di高成形性汽車用超高強鋼開發及應用 劉華賽，韓 赟，陽 鋒 III-52Recent Progress on Development and Application of Ultra-high Strength Steel with High Formability LIU Huasai, HAN Yun, YANG Feng熱軋和冷軋中錳汽車鋼的超塑性變形行為與機制研究 曹文全，王 昌，滿廷慧，王存宇，董 翰，翁宇慶 III-54Superplasticity Behavior and Mechanism of the HotCold Rolled Medium-Mn Autosteel CAO Wenquan, WANG Chang, MAN Tinghui, WANG Cunyu, DONG Han, WENG Yuqing先進高強汽車鋼板的集成計算材料工程研究 何燕霖，鄭偉森，張 宇，林 利，徐 鑫，劉仁東，李 麟 III-55人工智能驅動與計算模擬輔助的承溫1200℃單晶高溫合金智能設計 楊 帆，藺思源，趙文月，茹 毅，裴延玲，李樹索，宮聲凱 III-55AI-driven and Computational Simulation Assisted Intelligent Design of Single-crystal Superalloys for 1200℃ Ultra-high Temperature Application YANG Fan, LIN Siyuan, ZHAO Wenyue, RU Yi, PEI Yanling, LI Shusuo, GONG Shengkai高溫合金定向凝固晶體生長與CET轉變 李應舉，邱 義，馮小輝，楊院生 III-56Directional Solidification Crystal Growth and CET Transformation of Superalloys LI Yingju, QIU Yi, FENG Xiaohui, YANG Yuansheng特種冶煉行業信息化發展思路 朱勤天，陳正陽，畢中南 III-57Thoughts on the Informationization Development of China’s Special Smelting Industry ZHU Qintian, CHEN Zhengyang, BI Zhongnan基于機器學習的高性能鋁合金成分設計 楊 健，張 佼，戴永兵，雋永飛 III-58Composition Design of High-performance Aluminum Alloys Based on Machine Learning YANG Jian, ZHANG Jiao, DAI Yongbing, JUAN Yongfei數值模擬在高溫合金構件生產和制造上的應用 孫志民 III-59Application of Numerical Simulation in Super-alloy Products’ Design and Manufacture SUN Zhimin數智化在寶武特冶高溫合金鍛造生產中的應用與探索 曹金華，侯智鵬 III-60Application and Exploration on the Digital Intelligence Technology in the Superalloys Forging Production of Baowu Special Metallurgy CAO Jinhua, HOU Zhipeng先進材料數據庫及應用技術 張洪梅，程興旺，趙平洛 III-61 ZHANG Hongmei, CHENG Xingwang, ZHAO Pingluo機器學習輔助高熵合金成分設計 薛德禎 III-62Machine Learning-assisted Composition Design of High-entropy Alloys XUE Dezhen440MPa級高性能船體鋼技術研究進展 羅小兵，師仲然，柴希陽 III-62Research of 440 MPa High-performance Hull Steel LUO Xiaobing, SHI Zhongran, CHAI Xiyang輸氫管材與氫氣相容性研究 李 拔，汪 兵，賈書君，劉清友 III-63Study on Compatibility of Hydrogen Transport Pipe and Hydrogen LI Ba, WANG Bing, JIA Shujun, LIU Qingyou免噴丸熱成形鋼組織性能調控及抗氧化性能 鄭昊青，常智淵，蘇冠僑 III-64Development and Application of Antioxidant and Shot Peening Free Hot-formed Steel ZHENG Haoqing, CHANG Zhiyuan, SU Guanqiao超低Nb技術及其在結構板材及型材上的應用 王厚昕 III-65Study on Ultra Low Nb and Its Application in Commodity Products with YS 355MPa of Both Flat and H Beams WANG Houxin極薄取向硅鋼制造與應用 劉寶志 III-66Manufacture and Application of Ultra-thin GO Steel LIU Baozhi雙碳時代中國硅鋼產業發展機遇與挑戰 吳樹建 III-67Opportunities and Challenges for the Development of China’s Silicon Steel Industry in the Dual Carbon Era WU Shujian無底層綠色環保涂層高磁感取向硅鋼的開發與推廣應用研究 楊佳欣，申明輝，宋 剛 III-67Development and Application Promotion of Glassless High Permeability Grain-oriented Silicon Steel with Green and Environmentally Friendly Coating YANG Jiaxin, SHEN Minghui, SONG Gang高飽和磁化強度Fe-Si-B-C系非晶納米晶合金組織結構與性能調控 惠希東，呂 曠，李育洛，王偉民 III-68超穩定的Ce基金屬玻璃 張 博 III-69模壓電感用軟磁復合材料研發 王 麗，王明旭，史貴丙 III-69Rejuvenation to Relaxation Transition and Liquid Memory Effect in Metallic Glasses with Different Energy States WANG Lingling, WANG Zheng, HU Lina III-70基于熔體性質非晶合金微觀結構–性能一體化調控 張海峰 III-70人工智能輔助非晶合金結構與性能研究 管鵬飛 III-70弛豫非晶合金的再韌化 李 毅 III-71高性能軟磁非晶合金材料的開發及應用 孫保安，周 靖，李雪松，白海洋，汪衛華 III-71Research on High-performance Amorphous Magnetic Alloys SUN Baoan, ZHOU Jing, LI Xuesong, BAI Haiyang, WANG Weihua退火和低溫處理態軟磁Fe-Co-B系金屬玻璃的結構調制與性能表征 王 艷，肖宗奇，劉國強，翟思成 III-72Ni-Nb二元合金玻璃形成能力和結晶行為差異的結構起源研究 盧文飛，沈 軍 III-73一種具有位錯-析出相骨架的超強度和延展性的高熵合金 賈延東，王 剛，穆永坤 III-73A High-entropy Alloy with Dislocation-Precipitate Skeleton for Ultrastrength and Ductility JIA Yandong, WANG Gang, MU Yongkun含鈷鐵基非晶納米晶合金新成分開發探索 董幫少，邢彥興，崔宏祥，周少雄 III-74金屬玻璃薄膜穩定性和不均勻性及性能調控 羅 強 III-75激光3D打印非晶合金復合材料的相變增韌行為研究 張鵬程，柳 林 III-75低碳綠色鋼鐵冶金關鍵技術研發與應用 葉恒棣 III-76Development and Application of Low-carbon Green Iron and Steel Metallurgy Key Technology YE Hengdi鋼渣在建材領域資源化應用關鍵問題分析 田志紅 III-77Analysis of Key Problems in Resource Utilization of Steel Slag in Building Materials Field TIAN Zhihong基于5G技術的鋼鐵企業多維度生態環保管控系統開發與應用 姜德旺，張亞夫，朱宴恒 III-77Development and Application of Multi-dimensional Ecological Environmental Control System for Iron and Steel Enterprises Based on 5G Technology JIANG Dewang, ZHANG Yafu, ZHU Yanheng鋼鐵行業高質量綠色低碳發展路徑探討 陳 潔 III-79Research and Analysis of High-quality and Green-low-carbon Development Path of Steel Industry CHEN Jie鞍鋼節能環保技術開發與實踐 馬光宇，蔡秋野，王向鋒，李衛東，陳 鵬 III-80Development and Practice of Energy Conservation and Environmental Protection Technologies in Ansteel MA Guangyu, CAI Qiuye, WANG Xiangfeng, LI Weidong, CHEN Peng鋼鐵行業超低排放有組織監測評估技術與實踐 劉通浩 III-81Technology and Practice of Organized Monitoring and Evaluation of Ultra-low Emission in Steel Industry LIU Tonghao鋼鐵企業水系統現狀及節水降碳優化策略分析 余云飛 III-82Current Situation of Water System in Iron and Steel Enterprises and Analysis of Optimal Strategy of Saving Water and Reducing Carbon YU Yunfei鋼鐵行業超低排放與除塵系統節能技術發展現狀 王 琿，張 璞，楊雅娟 III-83Development Status of Ultra-low Emission and Energy-saving Technology of Dust Removal System in the Steel Industry WANG Hui, ZHANG Pu, YANG Yajuan熔融鋼渣高效負能處理技術與裝備 王宇鵬 III-83Technology and Equipment for High Efficient Negative Energy Treatment of Molten Steel Slag WANG Yupeng全流程鋼廠水系統智慧管控與零排放關鍵技術開發應用 桂其林 III-84Development and Application of Key Technologies for Intelligent Control and Zero Discharge of Steel Mill Water System in the Whole Process GUI Qilin鋼鐵冶金大綜固廢綜合利用與CO2減排 郭占成 III-85Comprehensive Utilization of Solid Waste and CO2 Emission Reduction in Iron and Steel Metallurgy GUO Zhancheng含鋅粉塵球團還原行為研究 朱德慶，石書冰，潘 建，郭正啟，楊聰聰 III-85Study on the Reduction Behavior of Zinc-bearing Dust Pellets ZHU Deqing, SHI Shubing, PAN Jian, GUO Zhengqi, YANG Congcong基于無廢城市建設的長流程鋼廠固廢管理模式與技術路徑 李紅紅 III-86Solid Waste Management Mode and Technical Path of Long-process Steel Plant Based on the Concept of Zero-waste Construction LI Honghong大型波紋形耐壓殼筒節結構優化與軋制理論研究 彭 艷，孫建亮，張 旭，吳潤澤，單存堯 III-87Theoretical Research on the Structural Optimization Design and Rolling of Corrugated Pressure-resistant Shell Heavy Cylinder PENG Yan, SUN Jianliang, ZHANG Xu, WU Runze, SHAN Cunyao中厚板試樣取樣生產智能控制系統研究 辛小臣 III-88Research on Intelligent Control System for Sampling Production of Medium and Thick Plate Samples XIN Xiaochen中冶賽迪軋鋼數字化解決方案及實踐 李 華，陶 濤 III-89帶式輸送機的智能化斷帶保護技術的研究與應用 徐言東，白金龍，郭 強，張勇軍，白英超 III-90 XU Yandong, BAI Jinlong, GUO Qiang, ZHANG Yongjun, BAI Yingchao首鋼智能制造技術研究與探索 于 孟 III-91Research and Exploration of Intelligent Manufacturing Technology in Shougang YU Meng鋼鐵企業全要素資源優化與智慧運營核心關鍵技術創新 汝金同 III-92鋼廠板坯庫調度問題的研究進展評述 鄭 忠，胡 赟，高小強 III-94基于工業互聯網平臺的鋼鐵行業AI應用 李 勝 III-94中厚板板型檢測系統開發與應用 田 勇 III-95數字驅動的寬厚板自動轉鋼系統研發與應用 何純玉 III-95中冶賽迪智能制造解決方案探索與實踐 童 心 III-96中冶賽迪煉鋼智能制造探索與實踐 王智君 III-96數字能源技術助力鋼企創新發展的探索與實踐 吳 杉 III-96板坯庫智能作業管理系統設計的實現與應用 張 鑫 III-97數字能源精益管控一體化 張冰峰 III-98國際物流與物流國際化 樊俊花 III-98International Logistics and Logistics Internationalization FAN Junhua冶金產品智能化儲運技術研究 劉武勝 III-99Research on Intelligent Storage and Transportation Technology for Metallurgical Products LIU Wusheng數字化時代鋼鐵行業供應鏈金融創新發展與風險管理 盧 強 III-99Innovative Development and Risk Management of Supply Chain Finance in the Steel Industry in the Digital Era LU Qiang網絡貨運平臺賦能大宗商品供應鏈數字化轉型升級的創新實踐 王后建 III-100Innovative Practice of Empowering the Digital Transformation and Upgrading of Bulk Commodity Supply Chains through Online Freight Platforms WANG Houjian現代“緊湊型”鋼鐵制造流程的極致設計-冶金流程學理論在邯鋼項目上的應用實踐 李 鐵，王新東，劉亞峰，付 康，李傳民 III-101The Ultimate Design of Modern “Compact” Steel Manufacturing Processes-Application Practice of Metallurgical Process Theory in Handan Steel Project LI Tie, WANG Xindong, LIU Yafeng, FU Kang, LI Chuanmin鋼鐵冶金鐵前工藝流程優化研究與實踐 王兆才，葉恒棣，魏進超 III-102Research and Practice on Process Optimization of Pre-ironmaking in Ferrous Metallurgy WANG Zhaocai, YE Hengdi, WEI Jinchao1 礦業工程1.1 采 礦李樓鐵礦采場充填密閉工藝 付宇峰 1-1Filling and Sealing Technology of Stope in Lilou Iron Mine FU Yufeng李樓鐵礦大結構采場充填采礦方法工業試驗 宋 亮 1-1Industrial Test of Filling Mining Method in Large Structure Stope of Lilou Iron Mine SONG Liang淺談礦山地下水防治技術現狀及發展趨勢 王 波 1-2Brief Discussion on the Current Situation and Development Trend of Mine Groundwater Prevention and Control Technology WANG Bo預注漿工藝在松散破碎帶巷道施工中的應用研究 李偉群，陳利泰 1-3Research of Advance Grouting Technology in Loose Broken Zone in Mine Excavation LI Weiqun, CHEN Litai基于膨脹支柱技術的孤立采場安全高效采礦方法 李元輝，熊志朋，趙福權 1-3Safe and Efficient Mining Method in Isolated Stope Based on Expandable Pillar Technology LI Yuanhui, XIONG Zhipeng, ZHAO Fuquan淺談數碼電子雷管在袁家村鐵礦的應用 賈傳鵬 1-4The Application of Digital Electronic Detonator in Yuanjiacun Iron Mine JIA Chuanpeng礦山溜井堵塞率預測的GA-BP神經網絡法 朱俊閣，于宏宇，王浩東，馬強英，路增祥 1-5GA-BP Neural Network Method for Predicting the Blockage Rate of Mine Orepass ZHU Junge, YU Hongyu, WANG Haodong, MA Qiangying, LU Zengxiang地下金屬礦山大塊產生原因以及處理措施 徐 濤，郭武英 1-6The Causes of the Occurrence of Large Blocks in Underground Metal Mines and the Treatment MeasuresXU Tao, GUO Wuying淺談井下金屬礦山發生懸頂?shù)脑�因以及處理措�?徐 濤，郭武英 1-7The Causes of Overhanging in Underground Metal Mines and the Treatment Measures are Discussed XU Tao, GUO Wuying排土場排水系統實踐探索與思考 劉 景，徐飛飛 1-7某礦切割井一次爆破成井研究及應用 夏文浩，宋衛東，張少鵬 1-8Research and Application of Blasting to Form a 10.5m Cutting Raise by One Step in a Mine1.2 選 礦蒙庫鐵礦含鐵圍巖再選資源化利用工業實踐 胡家倉，王國平 1-9NaCl濃度對油酸鈉體系的泡沫穩定性影響研究 智 慧，董振海，王 歡，滿曉霏 1-9Study on the Effect of NaCl Concentration on the Stability of Foam of Sodium Oleate System ZHI Hui, DONG Zhenhai, WANG Huan, MAN Xiaofei深槽型大傾角帶式輸送機鐵礦石輸送試驗研究 萬正道，張玉達，趙 斌 1-10Experimental Study on Iron Ore Conveying with Deep-slot and Large Inclined Angle Belt Conveyor WAN Zhengdao, ZHANG Yuda, ZHAO Bin基于離散元仿真的圓錐破碎機腔型優化 韓睿智，宋仁伯，王永金，劉丹丹，母 镕 1-11鐵精礦中硫浮選脫除與綜合利用試驗研究 劉興華，董英擇 1-12Experimental Study on Flotation Removal and Comprehensive Utilization of Sulfur in Iron Concentrate LIU Xinghua, DONG Yingze某高磷鮞狀赤鐵礦閃速磁化焙燒技術開發研究 李家林，陳 雯，劉 旭，劉小銀，陸曉蘇，彭澤友 1-12磁化焙燒工藝選別細粒難選赤鐵礦尾礦的試驗研究 楊曉峰，董振海 1-13湖北某鐵礦工藝礦物學及選礦試驗研究 李育彪，王忠紅，李萬青 1-14白云鄂博低品位鈮礦石選礦富集技術研究 王 祥，王 偉，周喻林，陳 雯 1-15Research Progress on Beneficiation Technology of Low-grade Niobium Ore in Baiyun Ebo WANG Xiang, WANG Wei, ZHOU Yulin, CHEN Wen高硫高鋅磁鐵礦深度除雜制備超純鐵精礦的工業實踐 廖振鴻，陳 雯，王秋林，劉 旭 1-15硫酸燒渣懸浮磁化焙燒提鐵技術研究 李文博，王 碩，唐志東 1-16不同高分子絮凝劑對東鞍山細粒赤鐵礦聚團-磁選的影響 李文博，張 爽，程紹凱，周立波 1-17氟碳鈰礦高梯度磁吸附行為研究 李文博，孫俊燕，張小龍 1-18獨居石在還原焙燒中浮選性質變化研究 李文博，瞿 瑞，趙 熙 1-18遼西低品位釩鈦磁鐵礦綜合利用 劉金生，刑振興，黃 壯，程功金，丁學勇，薛向欣 1-19Comprehensive Utilization of Low-grade Vanadium-titanium Magnetite in Western Liaoning Province LIU Jinsheng, XING Zhenxing, HUANG Zhuang, CHENG Gongjin, DING Xueyong, XUE Xiangxin某超大型磁赤混合鐵礦高效SAB流程選擇及實踐 張耀斌，牛建昆 1-20Selection and Practice of High Efficiency SAB Process for a Superlarge Magnetic Hematite Mixed Iron Mine ZHANG Yaobin, NIU Jiankun攀西某釩鈦磁鐵礦入庫尾礦工藝礦物學及有價資源回收探索試驗研究 蔡先炎，李 碩，陳 勇，陳福林，黃 延 1-21Exploring Experimental Study on Mineralogy and Valuable Resource Recovery of Inbound Tailings of a Vanadium Titanium Magnetite in Panxi CAI Xianyan, LI Shuo, CHEN Yong, CHEN Fulin, HUANG Yan攀西地區釩鈦磁鐵礦碎磨技術發展現狀 李 碩，蔡先炎，黃 延，王志杰，陳福林，吳 寧，王志林，楊道廣 1-22Development Status of Crushing and Grinding Technology of Vanadium Titano-Magnetite in Panxi Area LI Shuo, CAI Xianyan, HUANG Yan, WANG Zhijie, CHEN Fulin, WU Ning, WANG Zhilin, YANG Daoguang2 焦化及節能環保干熄焦年修復產調控技術優化研究與應用 朱慶廟，李 勇，侯士彬，趙振興，趙 鋒 2-1Research and Application on Optimization of Annual Restoration and Production Control Technology of CDQ ZHU Qingmiao, LI Yong, HOU Shibin, ZHAO Zhenxing, ZHAO Feng工業廢棄樹脂配煤煉焦技術應用研究 朱慶廟，未福宇，侯士彬，趙振興，趙 鋒 2-1Application of Coking Technology with Industrial Waste Resin Blending Coal ZHU Qingmiao, WEI Fuyu, HOU Shibin, ZHAO Zhenxing, ZHAO Feng真空碳酸鉀脫硫及TOP濕法制酸生產問題的查找與處理 楊天宇，張 欣，韓修尚，徐利民 2-2淺談焦油蒸餾精細化操作 孔德剛，王英達，孫喜民 2-3焦化項目中備煤工段除塵系統的設計計算 鄒 陽，楊雪蓮，楊 仙，李夢珂，李傳東 2-3Design Calculations of Dust Removal System in Coking Project ZOU Yang, YANG Xuelian, YANG Xian, LI Mengke, LI Chuandong焦化廢水石油類測定中不同吸附方法的比較 劉曉桃，宋文杰，尚志春，杜 彬，陳 偉，張 宇 2-4Comparison of Different Adsorption Methods in Determination of Petroleum in the Coking Wastewater LIU Xiaotao, SONG Wenjie, SHAGN Zhichun, DU Bin, CHEN Wei, ZHANG Yu焦爐煤氣制LNG聯產液氨工藝脫碳增產技術的研究 楊 鵬，欒樹龍 2-4Research on Decarbonization and Production Increase Technology of Coke Oven Gas to LNG Combined with Liquid Ammonia Production Process YANG Peng, LUAN Shulong關于干熄焦生產運行的幾點新建議和新思考 侯士彬，李秋鏑，李 勇，馬俊堯，高 微 2-6Several New Suggestions and New Suggestions about the CDQ Circulating HOU Shibin, LI Qiudi, LI Yong, MA Junyao, GAO Wei關于五煉焦作業區與西部煉焦作業區焦爐煤氣熱值存在差異的原因分析 侯士彬，李秋鏑，李 勇，馬俊堯，高 微 2-6焦爐煤氣干法精脫硫工藝的優化設計與應用 李 偉，王博林，韓渝京，李 鵬 2-7Optimization Design and Application of Dry Fine Desulfurization Process for Coke Oven Gas LI Wei, WANG Bolin, HAN Yujing, LI Peng循環氨水余熱用于工藝制冷的實踐 王思維，邱全山，周 誠，張曉萍，李 杰，胡 俊 2-7Practice of Circulating Ammonia Waste Heat used in Process RefrigerationWANG Siwei, QIU Quanshan, ZHOU Cheng, ZHANG Xiaoping, LI Jie, HU Jun硫銨母液焦油資源化利用技術的研發 朱曉淵，顏長青，施 亮，王傳薈，潘紅良 2-8Research and Development of Technology for Resource Utilization of Tar from Ammonium Sulfate Liquor ZHU Xiaoyuan, YAN Changqing, SHI Liang, WANG Chuanhui, PAN Hongliang二氧化鈰氮摻雜氮化碳光催化劑可見光下深度處理焦化廢水研究安 寧，胡紹偉，陳 鵬，王 永，王 飛，劉 芳 2-9Cerium DioxideNitrogen Doped Graphite Carbon Nitride for Photocatalytic Advanced Treatment of Coking Wastewater under Visible Light AN Ning, HU Shaowei, CHEN Peng, WANG Yong, WANG Fei, LIU Fang煤巖及焦炭光學組織評價焦炭宏觀性能 張文成 2-10Evaluation of Coke Macroscopic Properties by Optical Organization of Coke and Coal Rank ZHANG Wencheng高爐內焦炭降解行為及質量評價方法研究 陳靜波，張生富，姜 濤 2-117m焦爐電機車及APS控制系統優化 喬文超，張允東，孔 弢，趙 鋒，陳 鵬 2-11Optimization of Seven-meter Coke Oven Electric Motor and APS Control System QIAO Wenchao, ZHANG Yundong, KONG Tao, ZHAO Feng, CHEN Peng7.63m焦爐超超低排放的實踐 殷喜和 2-12The Practice of 7.63m Coke Oven with Ultra-low Emission YIN Xihe焦爐廢氣快速分析在焦化中的應用 邱 程 2-13淺談焦爐停產事故狀態下的工藝調整 邱 程，郭 飛 2-13基于焦爐測溫及加熱控制系統的探究與成果 邱 程，田龍振 2-13青鋼7m焦爐煤氣量與變頻器電流數據擬合分析 邱 程，郭 飛，何 波 2-14Fitting Analysis of Gas Volume and Converter Current Data of Qinggang’s 7m Coke Oven QIU Cheng, GUO Fei, HE Bo青特鋼焦化低水分熄焦生產實踐 邱 程，郭 飛，王永亮 2-14Low Moisture Coke Quenching in Qinggang Coking Plant Transformation and Production Practice QIU Cheng, GUO Fei, WANG Yong liang焦爐智能巡檢機器人應用實踐 邱 程，郭 飛 2-15配合煤堆密度在提高焦爐裝煤量方面的應用 邱 程 2-15兩項煤氣凈化工藝改進方案 楊 爽 2-15基于煤巖學方法分析焦炭“夾生”問題 王 越，龐克亮，吳昊天，谷致遠 2-16Analysis of “Incompletely Mature” Coke Based on Petrographic Method WANG Yue, PANG Keliang, WU Haotian, GU Zhiyuan改質瀝青的生產工藝及發展?jié)撃芨攀?徐志強，張立偉，閆雙雙，王 斌，王曉楠 2-16Overview of the Production Process and Development Prospect of Modified Pitch XU Zhiqiang, ZHANG Liwei, YAN Shuangshuang, WANG Bin, WANG Xiaonan干燥煤結焦過程傳熱傳質行為的數值模擬研究 仇 灝，劉和平 2-17武鋼7.63m焦爐蓄熱室積灰分析與判斷 陳細濤，嚴鐵軍，張 軍，常紅兵，陳 鵬 2-18Analysis of Ash in Regenerator Chamber of WISCO 7.63m Coke Oven CHEN Xitao, YAN Tiejun, ZHANG Jun, CHANG Hongbing, CHEN Peng焦化廠原料煤全自動檢化驗系統設計 賀世澤，吳 波 2-19Design of Automatic Test System for Raw Coal in Coking Plant HE Shize, WU Bo焦爐操作工藝對焦炭質量影響的分析 陳 鵬，嚴鐵軍，常紅兵，陳細濤，張 軍 2-19Analysis of Influence of Coke Oven Operation on Coke Quality CHEN Peng, YAN Tiejun, CHANG Hongbing, CHEN Xitao, ZHANG Jun二氧化鈦光催化劑改性研究 劉子娟，吳偉偉，李 達，賈楠楠，劉慶佩，王曉楠 2-20Study on Modification of Titanium Dioxide Photocatalyst LIU Zijuan, WU Weiwei, LI Da, JIA Nannan, LIU Qingpei, WANG Xiaonan高灰中硫瘦煤資源開發與利用 賀 佳，史永林，李昊堃，王鐘議 2-21Development and Utilization of High Ash and Medium Sulphur Lean Coal HE Jia, SHI Yonglin, LI Haokun, WANG Zhongyi焦化廢水深度處理技術的創新與實踐 李 斌，潘東山，王云峰 2-21Innovation and Practice of Advanced Treatment Technology for Coking Wastewater LI Bin, PAN Dongshan, WANG Yunfeng聯用工藝在煤化工綜合廢水處理中的應用 李 斌，潘東山，王云峰 2-22Application of Combined Process in Comprehensive Wastewater Treatment of Coal Chemical Industry LI Bin, PAN Dongshan, WANG Yunfeng焦爐機車除塵新技術的應用與創新 郭有林，成雪松，郭永貴 2-23Application and Innovation of New Dust Removal Technology for Coke Oven Locamotive GUO Youlin, CHENG Xuesong, GUO Yonggui氨水中焦油渣回收利用工藝優化 劉衛杰 2-23Optimization of the Recovery and Utilization Process of Tar Residue in Ammonia Water LIU Weijie焦化廠循環氨水的余熱利用 張 磊，付冠華 2-24190th干熄焦余熱鍋爐過熱器故障分析 曾石川 2-24The Failure Analysis of CDQ Boiler Superheater ZENG Shichuan西門子OUC通訊方式在焦化環保除塵中的應用研究 楊 光，向 勇 2-25Research on the Application of Siemens OUC Communication Method in Dust Removal of Coking Environmental Protection YANG Guang, XIANG Yong基氏流動度曲線特征在煉焦煤混煤判定中的應用 宋子逵，項 茹，劉 睿，丁 海 2-26Application of the Characteristics of Gieseler Fluidity Curve in the Determination of Coking Coal Blending SONG Zikui, XIANG Ru, LIU Rui, DING Hai3 煉鐵與原料3.1 燒結與球團燒結煙氣中NOx的產生機理及排放規律探研 桂林峰，蘇亞剛，李 彬，黃永安 3-1Research on the Generation Mechanism and Emission Law of NOx in Sintering Flue Gas GUI Linfeng, SU Yagang, LI Bin, HUANG Yong’an帶式焙燒機球團智能管控系統的研究與實現 劉富春，韓基祥，任 偉，李 丹，周檢平 3-1Research and Implementation of Intelligent Control System for Pellet of Belt Baking Machine LIU Fuchun, HAN Jixiang, REN Wei, LI Dan, ZHOU Jianping提高混勻礦穩定率的實踐 黎興文，陳 偉，李加龍，張錫寶，趙 彧 3-2Practice on Improving the Stability Rate of Mixed Ore LI Xingwen, CHEN Wei, LI Jialong, ZHANG Xibao, ZHAO Yu昆鋼B型料場揚塵綜合治理應用探析 陶傳昌，王志富，侯林坤，蘇 寶，謝志剛 3-3Exploring the Application of Comprehensive Dust Control in Kunming Steel’s B-type Material Yard TAO Chuanchang, WANG Zhifu, HOU Linkun, SU Bao, XIE Zhigang提高燒結料層上部成品率試驗研究 武 軼，張曉萍，李幫平，袁 鵬，熊德懷，朱賀民 3-3邯鋼360m2燒結機降低煤氣消耗生產實踐 王岳飛，王永林 3-4Production Practice of Reducing Gas Consumption in 360m2 Sintering Machine of Handan I&S Co. WANG Yuefei, WANG Yonglin鞍鋼鲅魚圈球團回轉窯結圈研究及控制實踐 任 偉，國泉峰，王 亮，張 偉，韓子文 3-4The Ring Study on Angang Bayuquan Rotary Pelletizing Kiln and Its Control REN Wei, GUO Quanfeng, WANG Liang, ZHANG Wei, HAN Ziwen燒結智能優化配礦的發展淺析 劉 杰，王耀祖，馬賢國，陳付振，劉征建，周明順，張建良 3-5Analysis on the Development of Sintering Intelligent Optimal Ore Blending LIU Jie, WANG Yaozu,MA Xianguo, CHEN Fuzhen, LIU Zhengjian, ZHOU Mingshun, ZHANG Jianliang堿度對高鉻型釩鈦磁鐵礦熔劑型球團中溫還原性能與反應動力學機理的影響 陳泊鍵，姜 濤，溫 婧，朱鳳湘，胡 鵬 3-6Reducibility Optimization and Reaction Mechanism of High-Chromium Vanadium-Titanium Magnetite Flux Pellets CHEN Bojian, JIANG Tao, WEN Jing, ZHU Fengxiang, HU Peng塞拉利昂鐵礦粉的燒結性能評價研究 段立祥，高洪莊，張大偉，劉 杰，張明洲 3-7Research of Sierra Leone Ore?s Sintering Performance DUAN Lixiang, GAO Hongzhuang, ZHANG Dawei, LIU Jie, ZHANG Mingzhou澳洲某赤褐鐵礦磨礦特性及其氧化球團制備行為研究 楊聰聰，曲士娟，潘 建，朱德慶，郭正啟，李思唯 3-8改善赤褐鐵礦球團生產過程和成品質量的方法 劉勝歌，張俊杰，張巧玉，賈來輝，裴元東，劉 桐，宋亞龍 3-9高比例赤褐鐵礦堿性球團實踐應用與研究 劉勝歌，張俊杰，張巧玉，賈來輝，裴元東，顧建苛，劉 桐，劉建波 3-10帶式球團配加含鐵含碳除塵灰生產實踐 胡守景，王業飛，秦立浩 3-11Production Practice of Adding Iron and Carbon Containing Dust Removal Ash to Belt Pellets HU Shoujing, WANG Yefei, QIN Lihao高壓輥磨預處理國內鐵精礦強化球團性能研究 高茂林 3-11Improvement the Pellet Performances of Domestic Iron Concentrate Pretreated by High Pressure Grinding Roller GAO Maolin紅磁混合精礦生產低堿度球團生產實踐 祁 立 3-12海砂型釩鈦磁鐵礦顆粒表面性能與球團制備研究 邢振興，劉金生，薛向欣，程功金，楊 合 3-12Study on Particle Surface Properties and Pellet Preparation of Sea Sand Type Vanadium Titanomagnetite XING Zhenxing, LIU Jinsheng, XUE Xiangxin, CHENG Gongjin, YANG He循環風流動狀態對球團熱工制度的影響 張 晨 3-13The Influence of the Circulating Airflow State on the Thermal System of the Pelletizing Process ZHANG Chen基于神經網絡和NSGA-Ⅱ的燒結參數多目標優化 臧疆文 3-14Multi-objective Optimization of Sintering Parameters Based on Neural Network and NSGA-Ⅱ ZANG Jiangwen某進口赤褐鐵礦磨礦特性及其氧化球團制備行為研究 楊聰聰，曲士娟，潘 建，朱德慶，郭正啟，李思唯 3-15MgO對CO分階段還原赤鐵礦過程膨脹性的影響 張 芳，彭 軍，常宏濤，王永斌 3-16The Effect of MgO on the Swelling Property of Hematite Reduced by CO Step-by-step ZHANG Fang, PENG Jun, CHANG Hongtao, WANG Yongbin3.2 高 爐 煉 鐵高爐開停爐技術創新實踐 陳生利 3-18Technological Innovation Practice of Blast Furnace Opening and Stopping CHEN Shengli高爐鐵水收得率攻關實踐 陳生利，彭 廳，余 駿 3-18Research Practice of Recovery Rate of Molten Iron in Blast Furnace CHEN Shengli, PENG Ting, YU Jun韶鋼7號高爐鐵口噴濺治理操作實踐 匡洪鋒 3-19Operation Practice of Iron Spitter Control for No. 7 Blast Furnace at Shaoguan Iron and Steel Group Co., Ltd. KUANG Hongfeng提高鐵水硅偏差命中率控制措施 余 駿，陳生利 3-20Measures to Improve the Error Hit Ratio of Molten Iron and Silicon YU Jun, CHEN Shengli梅鋼4070m3高爐爐墻結厚分析與爐況恢復 張光強，韓宏松，占世梅 3-20昆